Decorative acrylic plaster ANSERGLOB "beetle" with granulation of grain 2.0 mm; 2.5 mm is designed to perform a decorative, thin-layer plastering internal and external walls of buildings, as well as finishing decorative coating in the exterior insulation finishing system ANSERGLOB. It is applied on mineral substrates such as cement-sand and cement-lime plasters (age 28 days and moisture content less than 4%); plaster (humidity less than 1%); concrete foundations (age 3 months moisture less than 4%), etc. is Not recommended for use on the base of the building.
|The thickness of the layer||2,0 mm; 2,5 mm|
|The formation of a surface film||after 15 minutes|
|Adhesion to substrate||not less than 0,5 MPa|
|Introduction resistance to the effects of precipitation||after 24 hours|
|Water vapor permeability||not less than 0,3 mg/м٠г٠Па|
|Temperature basics||from -+°C to 5 +°C|
|Operating temperature||from -30°C to + 80°C|