Facade acrylic paint ANSERGLOB designed to perform surface finishing of internal and external walls of buildings, as well as a topcoat in exterior insulation finishing system ANSERGLOB. It is applied on any mineral substrates (concrete, brick, cement and cement-lime plaster (moisture content less than 4%); gypsum plaster and gypsum Board (moisture less than 1%), etc.) and organic base (plywood, MDF , chipboard, OSB, Wallpaper). Is used to restore the painting surface on decorative plasters. Facade acrylic paint ANSERGLOB (white base) can be tinted by the COLOR system, or used in basic white.
|Density||about 1.55 g/cm3|
|Spreading rate||about 150 g/m2|
|Time recoating||1 – 2 часов|
|Resistance to the diffusion of water vapour Sd||not more than 0.15 m|
|Temperature basics||from -+5°C to +30 80°C|
|Operating temperature||from -30°C to +80°|