Structural acrylic paint ANSERGLOB designed to perform thin-layer decorative surface finishes, interior and exterior walls, as well as finishing decorative coating in the exterior insulation finishing system ANSERGLOB. It is applied on any mineral substrates such as cement-sand and cement-lime plasters (age 28 days and moisture content less than 4%); plaster (humidity less than 1%); concrete foundations (age 3 months moisture less than 4%); masonry (age not less than 28 days), and organic bases (polystyrene plates, plywood, fiberboard, particleboard, OSB). Structural acrylic paint ANSERGLOB is tinted by the COLOR system, or used in basic white color ..
|The formation of a surface film||after 15 minutes|
|The adhesion to the substrate||not less than 0.5 MPa|
|Introduction resistance to precipitation||after 24 hours|
|Water vapor permeability||not less than 0.03 mg/м٠г٠Па|
|Temperature basics||from -+5°C to +30 80°C|
|Operating temperature||from -30°C to +80°|